• Item Image
    •  Downloads offline

    •  Downloads: 0

    •  File Size: 5305973054

    •  Version: 1.0
    •  Author: Fakefactory

-------------------------------------------------

- The first FINAL Alyx Hires models
- Reworked sounds and music
- Almost all textures reworked or updated
- Added Hires-Detail-Overlays
- Added HDR to HL2 (See below)
- Fixed two potential crash-bugs
- One pack for all episodes

-------------------------------------------------
Installation:

Take all the smaller rar files out of the larger rar. consolidation and place them in the same folder (You must put them in the same folder/subfolder!). Then, from file number 1, (the one that ends in part1) open it up and take out the installer files and setup. Make sure you also extract these to the same folder/subfolder! Then, turn off Steam and start the installer.



HDR for HL2
-------------------------------------------------

Not all HL2 maps are true HDR, because not all sources are available. For all other maps i used a technique, that i call "Entity injection". Technically i've used clientcommand entities and tonemapcontrollers to achieve a hdr-like type of blooming on those maps. This type of bloom is much more realistic than the old bloom mini-mod, because the effect is controllable inside the map for different settings at certain locations. You can call it HDR V0.5 or Bloom V2. Its some kind of super-enhanced bloom that gives a near-HDR look on the old HL2 maps. Some of the map-settings aren't final (i'm still at the fine-tuning phase)



HDR AND THE OLD VALVE MODELS:
-------------------------------------------------

With HDR enabled in HL2 some of the faces of the OLD ORIGINAL VALVE CIVILIAN models are appearing too bright sometimes. This little glitch will be fixed with the next version. The Hires models faces are looking right.



CHARACTER PIMPER:
--------------------------------------------------

By default most of the optional HD-models are disabled. You can use the "Character Pimper" to switch between HD models and original VALVE models.

The Alyx HD-model was built from scratch, all other models are based on massive modified POSER7 models and compiled with a rewritten studiocompiler, that is allowing a much higher polycount than VALVE's original compiler. The facial animations were build with 3DS MAX and exported with Cannonfodders VTA -exporter.


USING OLD CM6.x Alyx Hires models in this version
--------------------------------------------------

The V7 Alyx models are completely reworked with enhanced skeleton and facial animations. The older CM6 models are not longer used. If you want the older models from your CM6 installation, make a copy of the CM6 Characterpimper "repository" folder and the CM6 "hl2\materials\models\Adriana" folder before you uninstall it.

After installation of CM7 is completed, you can copy the old content to the V7 directory, BUT DON'T OVERWRITE V7 FILES! I strongly recommend to use the new CM7 models. They are optimized for the Orangebox engine. I will release recompiled V6 models as a update-patch in the near future.



SOUND DROPS OR CRACKLING:
-------------------------------------------------

If sound crackles occures, you can fix this by setting the snd_mixahead value in the autoexec's of CM's subdirectories. You will find the autoexec.cfg in the:

FAKEFACTORY_CM\hl2\cfg
FAKEFACTORY_CMEP1\ep1\cfg
FAKEFACTORY_CMEP2\ep2\cfg

directories. Try different value like snd_mixahead "0.2" or snd_mixahead "0.4" for increasing the buffered time of soundsamples. This will fix crackling or dropouts, but can lead to slightly asynchronous or delayed sounds.



MICROSTUTTER AND HEAPSIZE
--------------------------------------------------

If you encounter microstuttering ingame (animations), try the heapsize command.

Add -heapsize {bytes} to the shortcuts, i.e.:

Shortcut: Cinematic Mod EP2
Target: ....launcher.exe" -heapsize 512000.

But NEVER set the heapsize above [YOUR INSTALLE RAM / 3] or 512MB



SETUP.EXE AND VIRUS-WARNING
--------------------------------------------------

Setup uses a tool called SetACL for setting write permissions to the mods screenshots / cfg / SAVE directories. Some antivirus software could warn about possible malware. This is a false positive.



TECHNICAL INFO:
--------------------------------------------------

This mod's binaries are modified for memory allocation beyond 2 GB. To prevent STEAM from overwriting this binaries with its own copies on each start, the mod ist using a little launcher, that reroutes STEAM's original binaries to >NIL.

Start this mod only with the shortcuts in your start menu (that were created during installation)!


HARDWARE REQUIREMENTS:

- DX9 capable graphics hardware with minimum 256 MB VRAM. (512 MB recommended)
- 3 GB RAM (4 GB recommended)


SOFTWARE REQUIREMENTS:

- Fully installed STEAM Client; You can't start the mod without STEAM running.
- Fully installed and unlocked HL2 / EP1 / EP2; Make sure, you have started those games in the past.



32 BIT WARNING:
--------------------------------------------------

This mod was developed and tested on 64 Bit Windows. It is NOT supported on 32 Bit Windows, because of the limited Userspace with 32 Bit systems. You can try it on 32 Bit, but prepare for crashes.

On some 32 Bit systems it is possible to overcome this limitation with some boot.ini switches for raising the userspace limit. I'm not going into detail here, because those tweaks are dangerous and should only be
done by people, who are knowing exactly what they do.

ADDENTUM FOR VERSION 7:

V7 of this mod uses much more Hires textures than the previous versions. This means: The engine has to cache a peak-value of >2GB texturedata at runtime. It's almost impossible to play this mod crash-free on 32 Bit systems without lowering the graphics settings.



USED SOFTWARE FOR THIS MOD:

Adobe Photoshop CS2
3DS MAX 8
E-Frontier Poser 7
Microsoft C++ Visual Studio 2005
Powerbasic 8
VALVE Source SDK
Sony Soundforge 7
Sony Vegas 7
Crazy Bump 5
Cannonfodders SDK tools
entspy
vmex
Autoplay Mediastudio Pro
Setup Factory


USED TEXTURE RESOURCES:

Majang.com
3d.sk
Dosch
environmenttextures.com
Own photos


USED MODEL RESOURCES:

contentparadise.com
efrontier.com
daz3d.com

Note on 32/64-bit versions: After extensive email discussions with VALVE and the Half-Life Coders, FakeFactory came to the following conclusion: The Cinematic Mod will run on 32 Bit but it's no longer supported on 32 Bit systems, because of the limited user space with 32-bit Windows. Don't blame Valve or Fakefactory for this problem. It is a fundamental problem on all 32-bit platforms that can not and will not fixed with an engine update.

Fakefactorys Cinematic Mod 7

Item Image

 Downloads offline


-------------------------------------------------

- The first FINAL Alyx Hires models
- Reworked sounds and music
- Almost all textures reworked or updated
- Added Hires-Detail-Overlays
- Added HDR to HL2 (See below)
- Fixed two potential crash-bugs
- One pack for all episodes

-------------------------------------------------
Installation:

Take all the smaller rar files out of the larger rar. consolidation and place them in the same folder (You must put them in the same folder/subfolder!). Then, from file number 1, (the one that ends in part1) open it up and take out the installer files and setup. Make sure you also extract these to the same folder/subfolder! Then, turn off Steam and start the installer.



HDR for HL2
-------------------------------------------------

Not all HL2 maps are true HDR, because not all sources are available. For all other maps i used a technique, that i call "Entity injection". Technically i've used clientcommand entities and tonemapcontrollers to achieve a hdr-like type of blooming on those maps. This type of bloom is much more realistic than the old bloom mini-mod, because the effect is controllable inside the map for different settings at certain locations. You can call it HDR V0.5 or Bloom V2. Its some kind of super-enhanced bloom that gives a near-HDR look on the old HL2 maps. Some of the map-settings aren't final (i'm still at the fine-tuning phase)



HDR AND THE OLD VALVE MODELS:
-------------------------------------------------

With HDR enabled in HL2 some of the faces of the OLD ORIGINAL VALVE CIVILIAN models are appearing too bright sometimes. This little glitch will be fixed with the next version. The Hires models faces are looking right.



CHARACTER PIMPER:
--------------------------------------------------

By default most of the optional HD-models are disabled. You can use the "Character Pimper" to switch between HD models and original VALVE models.

The Alyx HD-model was built from scratch, all other models are based on massive modified POSER7 models and compiled with a rewritten studiocompiler, that is allowing a much higher polycount than VALVE's original compiler. The facial animations were build with 3DS MAX and exported with Cannonfodders VTA -exporter.


USING OLD CM6.x Alyx Hires models in this version
--------------------------------------------------

The V7 Alyx models are completely reworked with enhanced skeleton and facial animations. The older CM6 models are not longer used. If you want the older models from your CM6 installation, make a copy of the CM6 Characterpimper "repository" folder and the CM6 "hl2\materials\models\Adriana" folder before you uninstall it.

After installation of CM7 is completed, you can copy the old content to the V7 directory, BUT DON'T OVERWRITE V7 FILES! I strongly recommend to use the new CM7 models. They are optimized for the Orangebox engine. I will release recompiled V6 models as a update-patch in the near future.



SOUND DROPS OR CRACKLING:
-------------------------------------------------

If sound crackles occures, you can fix this by setting the snd_mixahead value in the autoexec's of CM's subdirectories. You will find the autoexec.cfg in the:

FAKEFACTORY_CM\hl2\cfg
FAKEFACTORY_CMEP1\ep1\cfg
FAKEFACTORY_CMEP2\ep2\cfg

directories. Try different value like snd_mixahead "0.2" or snd_mixahead "0.4" for increasing the buffered time of soundsamples. This will fix crackling or dropouts, but can lead to slightly asynchronous or delayed sounds.



MICROSTUTTER AND HEAPSIZE
--------------------------------------------------

If you encounter microstuttering ingame (animations), try the heapsize command.

Add -heapsize {bytes} to the shortcuts, i.e.:

Shortcut: Cinematic Mod EP2
Target: ....launcher.exe" -heapsize 512000.

But NEVER set the heapsize above [YOUR INSTALLE RAM / 3] or 512MB



SETUP.EXE AND VIRUS-WARNING
--------------------------------------------------

Setup uses a tool called SetACL for setting write permissions to the mods screenshots / cfg / SAVE directories. Some antivirus software could warn about possible malware. This is a false positive.



TECHNICAL INFO:
--------------------------------------------------

This mod's binaries are modified for memory allocation beyond 2 GB. To prevent STEAM from overwriting this binaries with its own copies on each start, the mod ist using a little launcher, that reroutes STEAM's original binaries to >NIL.

Start this mod only with the shortcuts in your start menu (that were created during installation)!


HARDWARE REQUIREMENTS:

- DX9 capable graphics hardware with minimum 256 MB VRAM. (512 MB recommended)
- 3 GB RAM (4 GB recommended)


SOFTWARE REQUIREMENTS:

- Fully installed STEAM Client; You can't start the mod without STEAM running.
- Fully installed and unlocked HL2 / EP1 / EP2; Make sure, you have started those games in the past.



32 BIT WARNING:
--------------------------------------------------

This mod was developed and tested on 64 Bit Windows. It is NOT supported on 32 Bit Windows, because of the limited Userspace with 32 Bit systems. You can try it on 32 Bit, but prepare for crashes.

On some 32 Bit systems it is possible to overcome this limitation with some boot.ini switches for raising the userspace limit. I'm not going into detail here, because those tweaks are dangerous and should only be
done by people, who are knowing exactly what they do.

ADDENTUM FOR VERSION 7:

V7 of this mod uses much more Hires textures than the previous versions. This means: The engine has to cache a peak-value of >2GB texturedata at runtime. It's almost impossible to play this mod crash-free on 32 Bit systems without lowering the graphics settings.



USED SOFTWARE FOR THIS MOD:

Adobe Photoshop CS2
3DS MAX 8
E-Frontier Poser 7
Microsoft C++ Visual Studio 2005
Powerbasic 8
VALVE Source SDK
Sony Soundforge 7
Sony Vegas 7
Crazy Bump 5
Cannonfodders SDK tools
entspy
vmex
Autoplay Mediastudio Pro
Setup Factory


USED TEXTURE RESOURCES:

Majang.com
3d.sk
Dosch
environmenttextures.com
Own photos


USED MODEL RESOURCES:

contentparadise.com
efrontier.com
daz3d.com

Note on 32/64-bit versions: After extensive email discussions with VALVE and the Half-Life Coders, FakeFactory came to the following conclusion: The Cinematic Mod will run on 32 Bit but it's no longer supported on 32 Bit systems, because of the limited user space with 32-bit Windows. Don't blame Valve or Fakefactory for this problem. It is a fundamental problem on all 32-bit platforms that can not and will not fixed with an engine update.


top